Home > Cannot Start > Word Cannot Start The Converter Mswrd632.wpc Solution

Word Cannot Start The Converter Mswrd632.wpc Solution

Contents

When I try to open these documents, my Desk top is unable to open them with Word 2000 Premium version. This is a normal situation since this file has been downloaded from the internet. I just created the AllowConversion under it and set bit to 1, but unable still to open the doc. Thanks so much!!! 😉 Reply Marc says: April 9, 2010 at 11:53 am Helped great, thanks! this contact form

Loading... Can you think of a reason why I can't find "Shared Tools" in the regedit? I had tried the other fixes out there and sometimes Microsoft's FixIt file works but most of the time I have to reinstall Office. Reply Nik says: February 8, 2010 at 9:29 am Unfortunately, you need administrative privileges to modify the registry. http://helpdeskgeek.com/office-tips/word-cannot-start-the-converter-mswrd632-wpc/

Word Cannot Start The Converter Mswrd632 Solution

says: 5 years ago I only seem to have one file under HKEY_LOCAL_MACHINE named "Default". Reply Peter says: December 17, 2009 at 8:08 pm Having received the mswrd632.wpc error I downloaded the Registry Entry. Reply Dacia says: March 22, 2010 at 11:05 am If after applying the registry fix (repeated numerous times above) Word 2003 still opens the file in random characters try this: Go This is my school project I need to submit tomorrow.

None of this other stuff worked but this did. :-) http://support.microsoft.com/kb/973904 Jason says: 6 years ago I just had the same issue, but it all turned out to be a red Have in mind that you will have to unregister mswrd632 first, which is noted above, before you make this changes. ---------------- However, it did not work, but when I clicked on My docs will open, and they look fine to me, but the error message pops up each time I try to open one, and I have to click OK twice for Word 2007 Cannot Start The Converter Wpft532 It is quite important.

In this case, you can disable the mswrd632 converter so you don’t get this error. Word Cannot Start The Converter Recovr32 Unfortunately this did not correct the problem. Can I return to the file again….the file is 0 bytes Thanks… taco115 says: 7 years ago This worked for a user of mine using Word 2003: 1. https://support.microsoft.com/en-us/kb/973904 The Word cannot start the converter Error comes up but after several clicks it will open the documents in unreadable format.

should this happen? Mswrd632 Wpc Converter Download [email protected] Reply martysberg says: February 28, 2010 at 8:59 am Deleting the registrty key seems to have worked fine. Which office version are you using? Thanks… Actually I can’t get it..

Word Cannot Start The Converter Recovr32

i am still gettig the error….yikes! this page But in the process i lost a lot of my data. Word Cannot Start The Converter Mswrd632 Solution Can give me the another way to solve this problem. Word Cannot Start The Converter Wpft532 The suggestion to "Go to Tools > Options > General (Tab) in Word 2003 And check “Confirm Conversion at Open”,When you next try to open the document it will prompt you

Category Science & Technology License Standard YouTube License Show more Show less Loading... weblink I had typed up a lease when my computer just randomly turned off. Windows , other choices do not work. Back to IE. Word Cannot Start The Converter Wpft632

warwin says: 5 years ago i tried to delete the mswrd6 on the reg edit section but when i opened the file it didn't display the pop-up anymore but instead it I used the updated Anti-Virus and there will be no virus there. Go to Tools > Options > General (Tab) in Word 2003 And check “Confirm Conversion at Open” When you next try to open the document it will prompt you with a http://hardwareyellowpages.com/cannot-start/word-cannot-start-the-converter-mswrd632-wpc-2007.html I wasn't exactly sure how to do it..but I followed the instructions.

Open regedit, Navigate to HKEY_LOCAL_MACHINESOFTWAREMicrosoftShared ToolsText ConvertersImportMSWord6.wpc 2. Word Cannot Start The Converter Mac Reply Elallandria says: October 12, 2010 at 6:17 am This guide was a lifesaver, thanks allot. Regards Jason bayusuph says: 6 years ago Same problem.

Applies only to ceratin files previously saved in word 2003.Have an XP, microsoft office 2007 Flag Permalink This was helpful (0) Collapse - And You Tried??

  • Please help! :( StevePTechSupport says: 6 years ago This problem popped up for me 2 days ago as well.
  • I have delete the following key 00000001 from my computer, but without no luck.
  • Check out http://support.microsoft.com/kb/973904 After getting to the website, FIRST see if there is a disclaimer at the top of the page before doing anything else.
  • Reply shuggy says: October 12, 2010 at 10:50 am I can only get so far with your steps.
  • There are some answers to this issue, but only yours resolve the problem! 😀 Reply paul says: January 26, 2010 at 9:22 pm Nik: "have you tried solution from other visitor?"
  • Problem solved, thanks!!
  • At this point I don't care about the original document that I still can't open..

Now, I am unable to predict the cause for this error. When I choose Word 2007, I get a doc will not open error. Then navigate to the following key: HKEY_LOCAL_MACHINESOFTWAREMicrosoftShared ToolsText ConvertersImportMSWord6.wpc melinda says: 6 years ago If this doesn't work, the file may be a Microsoft document image even if it says .DOC. Word 2013 Cannot Start The Converter Wpft532 Now, locate the following key on the registry editor.

I just experienced this problem today. Now, just launch the tool and from the main screen select “Browse” to provide the location of the corrupt document and then click on “Repair” option. KCCause says: 5 years ago I just resolved this issue for a colleague. http://hardwareyellowpages.com/cannot-start/word-cannot-start-the-converter-mswrd632-wpc-cryptolocker.html says: December 29, 2009 at 4:53 pm Someone in a microsoft news group suggested the file might be Word 2007 (…docx) but named as an earlier version (.doc).

You're a valuable asset; if I can help at all please let me know. Check KB973904 WARNING : If you use Registry Editor incorrectly, you may cause serious problems that may require you to reinstall your operating system. manofkent says: 6 years ago Had this problem for many weeks. Reply paul says: January 19, 2010 at 9:35 pm Nik, Help!

HKEY_LOCAL_MACHINESOFTWAREWow6432NodeMicrosoftShared ToolsText ConvertersImportMSWord6.wpc After doing this, Microsoft Word will use its own converters to convert and open the document. This would work fine. Reply RohitP says: September 30, 2011 at 5:49 pm For error word cannot start the converter mswrd632.wpc if the word file on the server is created as win 2003 format and Documents open fine through the 3rd party app using Office 2007 & Office 2010, but not on any Office 2003 machines.

Update:- Fix-IT solution for this registry changes is released. Reply Ashoutosh says: February 8, 2010 at 9:23 am I just could not install registry as message appears that same has been blocked by adminstrator. I just follow these steps and wolla!!.. Tried all of the solutions offered above and many others but without success.

This information should have been available from Microsoft help pages within Word or on the web but far as I know, it was not. However the issue is if I save the .doc file on my word for mac 2011 and try to open it on my word on my pc i get this error. The main advantage of using this program is that, it repairs MS Word files damaged due to any reasons like virus attack, improper usage, sudden system shut down, etc on Windows Any ideas??

I have read the comments regarding converting to .docx but I don't know how to go about trying that. I have the same problem and I fixed it using your instructions. just mention the save file format as 97-2003*.doc option. Locate and then click the following registry subkey: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shared Tools\Text Converters\Import\MSWord6.wpc On the Edit menu, click Delete.

Or VIRUS or what ever. so far only myself and two other colleagues have complained about it. I cannot find this file MSWord632.wpc on my Laptop so could not copy it from their to paste on my Desktop PC.