Home > Socket Error > Wsaemfile

Wsaemfile

Contents

The application has tried to determine the status of an overlapped operation which is not yet completed. It may also make explicit mention of other functions that can fail with this error. WSANO_DATA 11004 Valid name, no data record of requested type. Among other things, that is exactly what we've done here.

This normally results from an attempt to bind to an address that is not valid for the local computer. Developer suggestions: If you don't detect it beforehand (e.g. The explanation is simple and obvious: in order to connect to or send to a destination address, you need to provide the destination address. after the first failed with WSAEWOULDBLOCK).

Windows Socket Error 10054

For instance, even if you request to send() a few bytes of data on a newly created TCP connection, send() could fail with WSAEWOULDBLOCK (if, say, the network system has a On the server end, you could use a network system utility similar to BSD's "netstat -a" command to check that your server is running, and listening on the right port number. WSAESOCKTNOSUPPORT 10044 Socket type not supported. template.

This is usually a temporary error during host name resolution and means that the local server did not receive a response from an authoritative server. The following list describes the possible error codes returned by the WSAGetLastError function. it may occur when a pointer to a structures is invalid or when a value in structure field is invalid). Wsagetlasterror 0 recv(), recvfrom(), send(), sendto(): MSG_OOB was specified, but the socket is not of type SOCK_STREAM Developer suggestions: don't do that.

A message sent on a datagram socket was larger than the internal message buffer or some other network limit, or the buffer used to receive a datagram was smaller than the Posted by Jeff Trawick at 7:48 AM No comments: Post a Comment Newer Post Older Post Home Subscribe to: Post Comments (Atom) Emptyhammock Software consulting and product development based in Raleigh, The WinSock description for this error is "the specified socket type is not supported in this address family," which qualifies the error condition a bit more than the Berkeley explanation does. Note that the v1.1 WinSock specification does not explicitly state that this error occurs if the value you request is larger than the WSAData.iMaxUdpDg returned from WSAStartup().

In some instances, it also refers to the current state of the socket input parameter. Wsaeconnreset 10054 WinSock functions: gethostbyaddr(), gethostbyname(), getprotobyname(), getprotobynumber(), getservbyname(), getservbyport(), WSAAsyncGetProtoByName(), WSAAsyncGetProtoByNumber(), WSAAsyncGetServByName(), WSAAsyncGetServByPort(), WSAAsyncGetHostByAddr(), WSAAsyncGetHostByName(), See also: WSAHOST_NOT_FOUND, WSANO_RECOVERY, WSATRY_AGAIN WSANO_RECOVERY (11003) This is a non-recoverable error Berkeley description: This is a It's not unusual to see an increase of 95%+ in performance. SO_DEBUG, SO_DONTROUTE, SO_RCVBUF, SO_SNDBUF, TCP_NODELAY: optional socket options.

  1. Berkeley description: A write to an ordinary file, the creation of a directory or symbolic link, or the creation of a directory entry failed because the user's quota of disk blocks
  2. WSAEHOSTUNREACH 10065 No route to host.
  3. WinSock functions: socket() See also: WSAEPROTOTYPE, WSAEPROTONOSUPPORT WSAESTALE (10070) Stale NFS file handle.
  4. WSA_IO_PENDING 997 Overlapped operations will complete later.
  5. WinSock functions: the list of functions that explicitly list this error in the v1.1 Windows Sockets specification.
  6. WSA_NOT_ENOUGH_MEMORY 8 Insufficient memory available.
  7. This error occurs if you specifically reference a protocol that isn't part of the address family you also reference.
  8. WSAEFAULT 10014 Bad address.

What Is A Socket Error

WSAEINVALIDPROVIDER 10105 Service provider is invalid. WSAStartup may fail with this error if the limit has been reached. Windows Socket Error 10054 Berkeley description: A request to send or receive data was disallowed because the socket is not connected and (when sending on a datagram socket) no address was supplied. Winsock Error 10053 If the signal handler performs a normal return, the interrupted function call will seem to have returned the error condition.

A call to the WSALookupServiceEnd function was made while this call was still processing. For example, a socket call requests a SOCK_DGRAM socket, but specifies a stream protocol. This won't reveal too much unless you know the router addresses at the remote end, but it might help to identify if the problem is somewhere along the way. No more results can be returned by the WSALookupServiceNext function. Socket Error 10054 Connection Reset By Peer

WSA_QOS_NO_SENDERS 11007 No QoS senders. This usually results from trying to connect to a service that is inactive on the foreign host—that is, one with no server application running. Check whether you have a router configured in your network system (your WinSock implementation). User suggestions: see WSAHOST_NOT_FOUND for details.

Contact us at FireGiant Install with confidence. Socket Error 11004 Any other type of operation might also return this error—for example, setsockopt setting SO_KEEPALIVE if the connection has been reset. WinSock description: No equivalent.

WSA_QOS_ADMISSION_FAILURE 11010 QoS admission error.

A reserved policy element was found in the QoS provider-specific buffer.   Requirements Header Winsock2.h; Winerror.h See also Error Codes - errno, h_errno and WSAGetLastError Handling Winsock Errors FormatMessage WSAGetLastError   WSA_QOS_EPOLICYOBJ 11025 Invalid QoS policy object. you didn't call setsockopt(SO_BROADCAST)). Socket Error Codes Linux Latest entries 0x00000057 Relay Acces Denied Windows Registry Win2000 Oraops9.dll: Outlook Express Oe Spdstrm.exe Error 605 Ie Errors Free Data Recovery Download 10054 Error System Restore Acces Denied Error_resource_not_present Hp Printer

WinSock functions: socket() See also: WSAEAFNOSUPPORT, WSAEPFNOSUPPORT WSAEREMOTE (10071) Too many levels of remote in path Berkeley description: Item is not local to the host. WinSock description: The Windows Sockets definition of this error is very different from Berkeley. See also: WSAEAFNOSUPPORT WSAEPROCLIM (10067) Too many processes. An application attempts to use an event object, but the specified handle is not valid.

You can attempt to avoid the error by calling WSAIsBlocking() before making any WinSock function calls. WinSock description: No error. WSASYSCALLFAILURE 10107 System call failure. Microsoft C description: Permission denied.

For protocols and services resolution, it means the respective database wasn't located. WSA_QOS_EFILTERSTYLE 11019 Invalid QoS filter style. WinSock description: Same as Berkeley, except WinSock doesn't support the sendmsg() function, and some WinSock implementations are not so strict as to require an application with a datagram socket to "disconnect"--by We took the text of the errno manual page in BSD 4.3, filled in gaps and embellished, completing the information.

Berkeley description: A socket operation encountered a dead network. Cannot translate a name.