Home > Winsock Error > Wsaehostdown

Wsaehostdown

Contents

Try a traceroute to the destination address to check that all the routers are functioning. This has no network-relevant analog (although the "inode" reference could refer to a network file system entry). It means that there is a blocking operation outstanding. Check the destination address you are using.

This can help you (or your support staff) to zero-in on what's wrong when your application runs into a problem. WinSock functions: accept(), bind(), closesocket(), connect(), gethostbyaddr(), gethostbyname(), gethostname(), getpeername(), getprotobyname(), getprotobynumber(), getservbyname(), getservbyport(), getsockname(), getsockopt(), ioctlsocket(), listen(), recv(), recvfrom(), select(), send(), sendto(), setsockopt(), shutdown(), socket(), WSAAsyncGetHostByAddr(), WSAAsyncGetHostByName(), WSAAsyncGetProtoByName(), WSAAsyncGetProtoByNumber(), WSAAsyncGetServByName(), Networking activity on the local host has not been initiated. For instance, you might get WSAEBADF in place of WSAENOTSOCK on a system that provides some socket and file handle equivalency.

Winsock Error Windows 7

Ping the remote host you were connected to. Berkeley description: Too many open files. When it occurs, it could indicate a serious failure of your network system (i.e. It can occur if you're trying to run too many applications (of any kind) simultaneously on your machine.

  • See also: WSANO_DATA, WSANO_RECOVERY, WSATRY_AGAIN WSANOTINITIALISED (10093) Successful WSAStartup() not yet performed Berkeley description: No equivalent.
  • WinSock functions: WSAETIMEDOUT (10060) Connection timed out.
  • The WinSock implementation was unable to allocate additional memory to accommodate the function request.
  • Developer suggestion: Use the sample code fragment in the WSAStartup() documentation in the v1.1 specification, which demonstrates how an application negotiates a Windows Sockets specification version.
  • The Wsaehostdown error message is the Hexadecimal data format of the error message generated.
  • Berkeley description: A request to send data was disallowed because the socket had already been shut down with a previous shutdown() call.
  • Yes No (370 Views) TN8379: Network Errors and Fail Over Logic in MicroStrategy Intelligence Server 8.X Labels: Clustering, Intelligence Server, Performance/Stability, Server by LangZ on ‎04-25-2003 09:36 AM dllmost.com Search file
  • Networking activity on the local host has not been initiated.
  • WinSock functions: connect(), FD_CONNECT Additional functions: Any function that does I/O on the network could generate this error, and the WSAAsyncSelect() events FD_OOB, FD_READ, FD_WRITE.

For more information about authenticating Bluetooth devices, see BluetoothAuthenticateDevice. WinSock description: Same as Berkeley. Some WinSock implementation use these errors inappropriately, but they have a particular meaning. Wsagetlasterror send() & sendto(): socket not bound (for Dgram) or not yet connected (for Stream) The v1.1 specification also has a detailed description for the connect() function which says: "socket not already

The socket is marked as non-blocking (non-blocking operation mode), and the requested operation is not complete at this time. Wsaeconnaborted 10053 For the SO_BTH_MTU_MAX socket option, optval is a pointer to ULONG max_mtu; optlen is equivalent to "sizeof(ULONG)". Unfortunately, to find out what these errors mean you need to contact that WinSock provider. The SO_BTH_MTU option obtains or sets default RFCOMM MTU (maximum transmission unit) for connection negotiation to a value different than the RFCOMM protocol-default value.

WinSock description: Same as Berkeley. Winsock Error 10060 In response, the application may prompt the user to authenticate the two Bluetooth devices before connection. Developer suggestions: You need to be prepared to handle this error on any functions that reference blocking sockets, or any calls to blocking functions, if you allow the user to cancel This is one of the most frequent errors and one of the best to encounter, since it's one of the least ambiguous.

Wsaeconnaborted 10053

The Windows Sockets API does not have analogs for the Berkeley perror() and herror() functions that take the error value as input, and output the (short) text of each error value SO_BTH_MTU_MIN The SO_BTH_MTU_MIN socket option is an advanced option used primarily for validation. Winsock Error Windows 7 They signal unusual error conditions for which there's no WinSock error equivalent. Wsa Error Codes This error occurs if you specifically reference a protocol that isn't part of the address family you also reference.

The file's permission setting does not allow the specified access. If it persists, exit Windows or reboot your machine to remedy the problem. This won't reveal too much unless you know the router addresses at the remote end, but it might help to identify if the problem is somewhere along the way. The MAX MTU value must be between RFCOMM_MIN_MTU and RFCOMM_MAX_MTU, as defined in the Ws2bth.h header file. Winsock Error 10061

SO_BTH_MTU_MAX The SO_BTH_MTU_MAX socket option is an advanced option used primarily for validation. WinSock description: Partly the same as Berkeley. It could also occur if an application opens and closes sockets often, but doesn't properly close the sockets (so it leaves them open, as "orphans"). WinSock description: NOT same as Berkeley, but analogous.

WinSock functions: gethostbyaddr(), gethostbyname(), getprotobyname(), getprotobynumber(), getservbyname(), getservbyport(), WSAAsyncGetHostByAddr(), WSAAsyncGetHostByName(), WSAAsyncGetProtoByName(), WSAAsyncGetProtoByNumber(), WSAAsyncGetServByName(), WSAAsyncGetServByPort(), See also: WSAHOST_NOT_FOUND, WSANO_DATA, WSATRY_AGAIN WSASYSNOTREADY (10091) Network subsystem is unavailable Berkeley description: No equivalent. Wsaeconnrefused Ping a host on the same subnet as the host you were connected to (if you know one). However, there's little distinction between WSAEALREADY and WSAEINVAL since a WinSock DLL cannot tell the difference between an asynchronous operation that has been cancelled and one that was never valid.

If you have more than one server configured, the hostname query fails only after the WinSock DLL has queried all servers.

WinSock functions: Additional functions: For Berkeley compatibility, the socket() function should fail with this error if an unsupported address family is requested. Can you ping that hostname? Developer suggestions: to make your application more portable: with datagram sockets don't use connect() and sendto() on the same datagram socket in an application, and always "disconnect" before calling connect() more Wsaewouldblock For the SO_BTH_AUTHENTICATE socket option, optval is a pointer to ULONG bAuthenticate and must be TRUE; optlen is equivalent to "sizeof(ULONG)".

See ASP.NET Ajax CDN Terms of Use – http://www.asp.net/ajaxlibrary/CDN.ashx. ]]> Indy 9 Content | Index | Reference wsaehostdown Unit: Berkeley description: A bad option or level was specified in a getsockopt()(2) or setsockopt(2) call. The errors that have User suggestions are all the same ones in the "User-fixable errors" list above. A socket operation encountered a dead host.

The minimum MTU must be between RFCOMM_MIN_MTU and RFCOMM_MAX_MTU, as defined in the Ws2bth.h header file. WSAEBADF (10009) Bad file descriptor. WinSock description: Similar to Berkeley. This behaviour has not changed for MicroStrategy 8.X Did this article solve your problem?

The v1.1 WinSock specification only ascribes thirty-three of the fifty errors to any of the WinSock functions in the v1.1 for Windows Sockets specification. Since the buffering requirements for sending are less than for receiving datagrams, it's conceivable that you can send a datagram larger than you can receive. Berkeley description: An attempt was made to access an open file (on an NFS filesystem) which is now unavailable as referenced by the file descriptor. Unlike Berkeley, however, WinSock v1.1 doesn't ascribe this error to any functions.

Developer suggestions: WSAStartup() failed, and you didn't detect it, or it wasn't called for the current task at all, or you called WSACleanup() too many times. Commercial license available from the Doc-O-Matic site. For the SO_BTH_MTU_MAX socket option, optval is a pointer to ULONG max_mtu; optlen is equivalent to "sizeof(ULONG)". after failed calls to inet_addr() or gethostbyname()), then simply test your address value for zero before you pass it to sendto().

Berkeley description: The host you were connected to crashed and rebooted. Downloads and tools Windows 10 dev tools Visual Studio Windows SDK Windows Store badges Essentials API reference (Windows apps) API reference (desktop apps) Code samples How-to guides (Windows apps) Learning resources An unfinished installation, an unfinished file erasure, bad deletion of applications or equipment. WinSock functions: WSAESHUTDOWN (10058) Cannot send after socket shutdown.

Notice that asynchronous service and protocols functions are listed below, in addition to the hostname resolution functions. But that's not to say you shouldn't still be prepared.