Home > Xerox Phaser > Xerox Phaser 8200 Error

Xerox Phaser 8200 Error

This is common issue which happens since you really do not need to separate the assembly into the two parts but the manaul say to and most people do and when It is like dumping a lot of money into a used car which is on its last legs. I do not think the person I bought it from understood this since I bought it a couple of months ago to use when I needed a replacement.I have read on by Xerox Tech on Sep 7, 2005 at 6:41pm Add comment Please sign in to comment 0 Well woodman what did you find. check over here

Covered by US Patent. I re-seated the boards a couple times and twice it started to initialize but hung up with the big Xerox when it got to something involving the print head. (I couldn't At least I've had good luck with them. the copy count is 57000.

Check that the printhead-to-drum gap isnot too close (the drum can act as a heatsink). by Andrew951 on Jan 30, 2009 at 2:18am Add comment Please sign in to comment 0 The lamps will only come on after it has finished the initialization and has started Resetting home postion. Cycling all the trays and doors has fixed issues like what you are describing in the past for me, but running the diagnostics will tell you if it is a heating

This past week end I moved it to my new office. Problem solved. The left jet-stack heater (the heating element heating the jets on the left-hand side) is not heating or is heating too slowly. If you have tried all the listed solutions for this problem and the problem persists, then service is required.

If it were my printer I would sell the good parts or the complete printer as a parts unit and forget about trying to repair it. Initially the machine would not feed paper on an intermittent basis, you would get a paper jam error message and there also as part of this failure would be a fairly I have replaced the heater lamps once about a year ago. These are *very* expensive to replace.

If it is set to 255 the printer will not make it through ELS and WILL shut its self off. I noticed that it doesn't say it *will* damage the printer, just it may... I feel a bit lucky this time.Regards,Simon by unknown on Mar 18, 2008 at 1:03am Add comment Please sign in to comment 0 I replaced the bulbs in the 8200 and There are two lamps inside the heater so by watching it might be hard to tell if only one is heating up.

  1. Maybe I am mising something, but a computer next to a printer will not cause it to shut off unless there is a power issue not a DRIVER issue.
  2. by Xerox Tech on May 21, 2005 at 8:46pm Add comment Please sign in to comment 0 This is an unrelated issue to the maintenance kit and it is intended for
  3. I have heard of people setting the date back on their printers and having the warning go away, but that opens the door for other problems.
  4. by Xerox Tech on Jun 20, 2005 at 5:39pm Add comment Please sign in to comment 1 Hello, I am hoping someone can help me..
  5. Do you see how this could be a bad thing?
  6. Message 2 of 4 (4,457 Views) Reply 0 Kudos JohnXDPS Frequent Member Posts: 20 Registered: ‎09-21-2010 Re: Phaser 8200 paper feed error Options Mark as New Bookmark Subscribe Subscribe to RSS
  7. We have had to replace quite a few.
  8. Could be the printhead itself, one of the motors or even the drum heater assembly and not just the bulbs.

It is out of warrenty! by Xerox Tech on Oct 26, 2005 at 4:51pm Add comment Please sign in to comment So does anyone have any suggestions? - tazzer22 0 Is it still using the old by dlstoehner on Apr 20, 2009 at 10:55am Add comment Please sign in to comment 0 Super glue is a temporary fix that might work for a short while, but if My business neighbor has an 8200, so I borrowed his 128 MB SODIMM and reinstalled controller+SODIMM4.

by dmzcompute on Apr 1, 2007 at 8:28am Add comment Please sign in to comment 0 A long time ago, I used to live in an apt. check my blog The hidden service menu should appear. The lamps that you see are for heating the drum if I am not mistaken and work very quickly.The "wax spots page" though pretty and a little Jackson Pollokish, is the I have 67\% left and it prints like a champ!

You're liable to pick up impurities from the ink, which could ruin your printhead. Are you aComputer / IT professional?Join Tek-Tips Forums! eriklub (TechnicalUser) 17 Apr 08 07:36 I found an overview of POST (Power On Self Test) Error messages. http://hardwareyellowpages.com/xerox-phaser/xerox-xerox-phaser-4510-ram-error.html you can create a shape in word and fill it with 100\% magenta see if there is a difference between the photoshop image and the word image.

From memory the command go someting like this: Net use lpt1:\\\\computername\\printername /persistent:yes This will make any file sent to the lpt1 port to print to that prnter. Make the switch more obvious so we don't need to go scrounging for an obscure date setting in a not-well-publicized web interface. Replace the printhead.Customer: That looks like what I need.

Also make sure the tray is filled to the top with paper.

Remove the side covers and watch it try the diagnostics again. One day as I was cleaning and cleaning in another attempt to go streak free for even just a little while, the printer simply shut off. by Xerox Tech on Apr 21, 2005 at 6:20pm Add comment Please sign in to comment 1 left side on the bottom second from the front. Unless your printer is under warranty it's not worth it.

by Xerox Tech on Mar 21, 2005 at 7:55pm Add comment Please sign in to comment 0 Ok while watching it warm up I realized two things, One the printer makes Test print had some black hash and a few missing columns6. They are not for the home user who prints 2 pages a day. have a peek at these guys Received 'RAM error' message at bootup for both different SODIMMs.9.

you should have nothing to worry about by Xerox Tech on Jun 16, 2005 at 6:37pm Add comment Please sign in to comment 0 i would just like to know if by Xerox Tech on Jul 12, 2005 at 6:21pm Add comment Please sign in to comment Xerox will charge $25 to assist with this problem if I don't have a Service If they are reasonably close to the same, then it should work...Perhaps if there's someone out there who has one with like a paper feed problem that they're planning to junk I was very satisfied.

I took it to an authorized repair company and they quoted me $800.. by unknown on Jul 13, 2005 at 10:41am Add comment Please sign in to comment 0 We are using a Phaser 850 It gives the error that the maintenance kit needs Does anyone out there no what the error indicates and what can I do about it. Another thing you might want to do is to connect to the printer through the ethernet port and control it that way.

Either that or they havn't tested it... They are available as a kit on this site, complete with instructions. by Perkins on Sep 10, 2005 at 2:57am Add comment Please sign in to comment 0 Hi, I was hoping the XeroxTech could help with this... Just list it on ebay as a parts unit and you can at least get something for it since many people need the power supply, main board and drum heater.

If it just starts to warm up again, you may have a issue with the drum heater bulbs and they have a kit for it on this site under the specials Set it to and then type that in your MAC browser (if you are using a crossover cable). Because that is definitly what the problem is (on the left side where the CWP motor and sensor arn't is where the belt was loose. by dmzcompute on Dec 19, 2005 at 8:34am Add comment Please sign in to comment 0 I'm considering pulling the printhead, is there any special instruction on the removal.

In the process of putting it back togather I came up with one extra part that I can't find where it goes. Is there only one thermister or a way to test which jet is giving me the problem. One of these days I'll have to take a couple samples over to the lab and test it. by skikaz on Sep 18, 2005 at 3:54am Add comment Please sign in to comment 0 Hi, on using the incorrect ink....

Noticed the paper is just to the left of the flag sensor visible from the front of the unit and CANNOT figure why - stripped and rebuilt front roller assembly repeatedly modified the printer (I actually put in the ink tray from one of the junk 850's so we could continue getting the free black ink :) ), now the 8200 printer by tazzer22 on Oct 27, 2005 at 8:40pm Add comment Please sign in to comment 0 Hi...anyone have a solution for a Phaser 8200's sudden loss of power, and subsequent failure Subscribe to our monthly newsletter for tech news and trends Membership How it Works Gigs Live Careers Plans and Pricing For Business Become an Expert Resource Center About Us Who We